GB/T 15234-1994 Translated English of Chinese Standard (GB/T15234-1994): Plastics flat palletshttps://www.chinesestandard.net, 2021 M11 5 - 13 páginas This Standard specifies the basic requirements for product classification, technical requirements, test methods, inspection rules and signs, transportation, and storage of plastic flat pallets. This Standard is applicable to single-sided and double-sided plastic flat pallets (hereinafter referred to as pallets) that use high-density polyethylene, polypropylene, etc. as the main raw materials, and can be used in 2-way or 4-way with a cross load P of 1000 kg. |
Contenido
4 | |
Theme Contents and Scope of Application | 5 |
Test Methods | 6 |
Inspection Rules | 12 |
Markings Transportation and Storage | 13 |
Términos y frases comunes
4-way pallet 6.3.2 Calculation A1 and A2 affect use Deflection arithmetic mean value batch of products Corner drop test cracks and deformation Deflection rate deflection value deformation that affect diagonal length Double-sided used 2-way evenly distributed hard horizontal surface height of Point horizontal plane includes the mass increase the test length H load for 24h load is 0.1P Load Test load lower spread plate measure the diagonal measured at A1 mechanical properties pallet 3 Double-sided Physical and mechanical Place the pallet process conditions provisions of 5.3 record the deflection record the Value result is expressed Results After unloading results measured shown in Figure Single-sided used 4-way spread plate relative Stacking Test 6.3.2 Strength Test 6.7.2 Tensile strength test test 6.7.1 Procedures Test 6.7.2 Calculation Test device test load block test load includes test load plate test of lower test result type inspection Uniform load strength upper spread plate Value y2